2024 – CHAPTER 8 Assignment Exercise 8 1 FIFO and LIFO Inventory Study the FIFO and LIFO explanations in the chapter Required

Assignment Exercise 8–1: FIFO and LIFO Inventory

Study the FIFO and LIFO explanations in the chapter.

Assignment Exercise 8–2: Inventory Turnover

Study the “Calculating Inventory Turnover” portion of the chapter closely, whereby the cost of goods sold divided by the average inventory equals the inventory turnover.

Example 8A: Depreciation Concept

Assume that Metropolis Health System (MHS) purchased equipment for $200,000 cash on April 1 (the first day of its fiscal year). This equipment has an expected life of 10 years. The salvage value is 10% of cost. No equipment was traded in on this purchase.

Straight-line depreciation is a method that charges an equal amount of depreciation for each year the asset is in service. In the case of this purchase, straight-line depreciation would amount to $18,000 per year for 10 years. This amount is computed as follows:

• Step 1. Compute the cost net of salvage or trade-in value: 200,000 less 10% salvage value or 20,000 equals 180,000.
• Step 2. Divide the resulting figure by the expected life (also known as estimated useful life): 180,000 divided by 10 equals 18,000 depreciation per year for 10 years.

Accelerated depreciation represents methods that are speeded up, or accelerated. In other words a greater amount of depreciation is taken earlier in the life of the asset. One example of accelerated depreciation is the double-declining balance method. Unlike straight-line depreciation, trade-in or salvage value is not taken into account until the end of the depreciation schedule. This method uses book value, which is the net amount remaining when cumulative previous depreciation is deducted from the asset’s cost. The computation is as follows:

• Step 1. Compute the straight-line rate: 1 divided by 10 equals 10%.
• Step 2. Now double the rate (as in double-declining method): 10% times 2 equals 20%.
• Step 3. Compute the first year’s depreciation expense: 200,000 times 20% equals 40,000.
• Step 4. Compute the carry-forward book value at the beginning of the second year: 200,000 book value beginning Year 1 less Year 1 depreciation of 40,000 equals book value at the beginning of the second year of 160,000.
• Step 5. Compute the second year’s depreciation expense: 160,000 times 20% equals 32,000.
• Step 6. Compute the carry-forward book value at the beginning of the third year: 160,000 book value beginning Year 2 less Year 2 depreciation of 32,000 equals book value at the beginning of the third year of 128,000.
  • — Continue until the asset’s salvage or trade-in value has been reached.
  • — Do not depreciate beyond the salvage or trade-in value.

Practice Exercise 8–I: Depreciation Concept

Assume that MHS purchased equipment for $600,000 cash on April 1 (the first day of its fiscal year). This equipment has an expected life of 10 years. The salvage value is 10% of cost. No equipment was traded in on this purchase.

Assignment Exercise 8–3: Depreciation Concept

Assume that MHS purchased two additional pieces of equipment on April 1 (the first day of its fiscal year), as follows:

• 1. The laboratory equipment cost $300,000 and has an expected life of = years. The salvage value is 5% of cost. No equipment was traded in on this purchase.
• 2. The radiology equipment cost $800,000 and has an expected life of 7 years. The salvage value is 10% of cost. No equipment was traded in on this purchase.

Example 8B: Depreciation

This example shows straight-line depreciation computed at a five-year useful life with no salvage value. Straight-line depreciation is the method commonly used for financing projections and funding proposals.

Example 8C: Depreciation

This example shows straight-line depreciation computed at a five-year useful life with a remaining salvage value of $10,000. Note the difference in annual depreciation between Example 8B and Example 8C.

Example 8D: Depreciation

This example shows double-declining depreciation computed at a five-year useful life with no salvage value. As is often the case with a five-year life, the double-declining method is used for the first three years and the straight-line method is used for the remaining two years. The double-declining method first computes what the straight-line percentage would be. In this case 100% divided by five years equals 20%. The 20% is then doubled. In this case 20% times 2 equals 40%. Then the 40% is multiplied by the remaining balance to be depreciated. Thus 60,000 times 40% for year one equals 24,000 depreciation, with a remaining balance of 36,000. Then 36,000 times 40% for year two equals 14,400 depreciation, and 36,000 minus 14,400 equals 21,600 remaining balance, and so on.

Now note the difference in annual depreciation between Example 8B, using straight-line for all five years, and Example 8D, using the combined double-declining and straight-line methods.

Practice Exercise 8–II: Depreciation

Compute the straight-line depreciation for each year for equipment with a cost of $50,000, a five-year useful life, and a $5,000 salvage value.

Assignment Exercise 8–4: Depreciation

Set up a purchase scenario of your own and compute the depreciation with and without salvage value.

Assignment Exercise 8–5: Depreciation Computation: Units-of-Service

Study the “Units of Service” portion of the chapter closely.

Example 9A

Review the chapter text about annualizing positions. In particular review Exhibit 9–2, which contains the annualizing calculations.

Practice Exercise 9–I: FTEs to Annualize Staffing

The office manager for a physicians’ group affiliated with Metropolis Health System (MHS) is working on her budget for next year. She wants to annualize her staffing plan. To do so she needs to convert her staff’s net paid days worked to a factor. Their office is open and staffed seven days a week, per their agreement with two managed care plans.

The office manager has the MHS worksheet, which shows 9 holidays, 7 sick days, 15 vacation days, and 3 education days, equaling 34 paid days per year not worked. The physicians’ group allows 8 holidays, 5 sick days, and 1 education day. An employee must work one full year to earn 5 vacation days. An employee must have worked full time for three full years before earning 10 annual vacation days. Because the turnover is so high, nobody on staff has earned more than 5 vacation days.

Assignment Exercise 9–1: FTEs to Annualize Staffing

The Metropolis Health System managers are also working on their budgets for next year. Each manager must annualize his or her staffing plan, and thus must convert staff net paid days worked to a factor. Each manager has the MHS worksheet, which shows 9 holidays, 7 sick days, 15 vacation days, and 3 education days, equaling 34 paid days per year not worked.

The Laboratory is fully staffed 7 days per week and the 34 paid days per year not worked is applicable for the lab. The Medical Records department is also fully staffed 7 days per week. However, Medical Records is an outsourced department so the employee benefits are somewhat different. The Medical Records employees receive 9 holidays plus 21 personal leave days, which can be used for any purpose.

Example 9B

Review the chapter text about staffing requirements to fill a position. In particular review Exhibit 9–4, which contains (at the bottom of the exhibit) the staffing calculations. Remember this method uses a basic work week as the standard.

Practice Exercise 9–II: FTEs to Fill a Position

Metropolis Health System (MHS) uses a basic work week of 40 hours throughout the system. Thus, one full-time employee works 40 hours per week. MHS also uses a standard 24-hour scheduling system of three 8-hour shifts. The Admissions manager needs to compute the staffing requirements to fill his departmental positions. He has more than one Admissions office staffed within the system. The West Admissions office typically has two Admissions officers on duty during the day shift, one Admissions officer on duty during the evening shift, and one Admissions officer on duty during the night shift. The day shift also has one clerical person on duty. Staffing is identical for all seven days of the week.

Assignment Exercise 9–2: FTEs to Fill a Position

Metropolis Health System (MHS) uses a basic work week of 40 hours throughout the system. Thus, one full-time employee works 40 hours per week. MHS also uses a standard 24-hour scheduling system of three 8-hour shifts. The Director of Nursing needs to compute the staffing requirements to fill the Operating Room (OR) positions. Since MHS is a trauma center, the OR is staffed 24 hours a day, 7 days a week. At present, staffing is identical for all 7 days of the week, although the Director of Nursing is questioning the efficiency of this method.

The Operating Room department is staffed with two nursing supervisors on the day shift and one nursing supervisor apiece on the evening and night shifts. There are two technicians on the day shift, two technicians on the evening shift, and one technician on the night shift. There are three RNs on the day shift, two RNs on the evening shift, and one RN plus one LPN on the night shift. In addition, there is one aide plus one clerical worker on the day shift only.